Level_Right_Blog1

LEVEL YOUR RETICLE RIGHT!

As experienced hunters and long-range competition shooters know, a scope's reticle must be perfectly aligned with the rifle barrel bore's axis to prevent left- or right-drift of the bullet's point-of-impact when shooting beyond the zeroed distance. Scopes that are not properly aligned with the barrel will exhibit point-of-impact drift that increases with the shooting distance.

REAV-LevelRightPro-LevelReticle_BLOG-1.jpg

In the past, cumbersome procedures and multiple bubble levels were required to achieve reticle alignment. Now, the revolutionary Level-Right™ PRO makes the process simple enough that anyone can install their scope the right way at their home workbench.

REAV-LevelRightPro-NotTurret_1000x1000.jpg
The turret on most scopes is not perfectly aligned with the reticle, therefore it is an unreliable reference plane.

Rather than attempt to level the rifle's barreled action and the scope independently using small bubble levels and indexing scope alignment off the turret (an imprecise method), the Level-Right PRO indexes with the radii of the barrel and the scope objective bell simultaneously to level the entire barreled action and scope assembly.

REAV-LevelRightPro_InUse-7038_1200x1200-1024x1024.jpg

To then align the scope reticle to the barrel axis, the Level-Right PRO utilizes a Reticle Light and a leveled Precision Alignment Grid placed behind the rifle.

REAV-LevelRightPro_InUse-7048_1200x1200-1024x1024.jpg

The light projects the reticle onto the grid, allowing the installer to simply rotate the scope until the projected reticle aligns with the grid's vertical and horizontal planes. Once aligned, simply lock down the scope rings and the installation is complete and accurate.

REAV-LevelRightPro-SmartTorq_InUse-7042_1200x1200-1024x1024.jpg

Howard Tripp, Chief Innovation Officer at Real Avid said “Guns continue becoming more accurate, and technology keeps improving optics performance. We looked at the way that scopes get mounted. We talked to many shooters and we realized there had to be a better way. Until now, there have only been complicated old school methods that aren’t capable of the kind of precision modern shooters demand.  We eliminated fumbling with small levels and went right to the heart of the problem and created a Master Grade tool that quickly levels the reticle, not the turret. Our Gun DIY® customers want to do the job themselves, and they want the best tool for that job.”

REAV-LevelRightPro_InUse-7066_1200x1200-1024x1024.jpg
Level-Right™ PRO comes with both a standard barrel mount and an interchangable rail mount

Check out the Product Page for more information, pictures and video.

 

Back to blog